
Environmental Requirements:
This product is intended for indoor use at altitudes up to 2000 meters, Pollution Degree 1 or 2 in accordance with IEC 664 and transient overvoltages according to Installation
Categories (Overvoltage Categories) I, II and III. For mains supply, the minimum and normal category is II.
CE Mark:
All Scientech Electronic Balances carry the CE Mark and conform to the requirements of the following standards:
EN 55011: 1998 Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific and Medical (ISM) Radio-frequency Equipment
EN 61326-1: 1997 EMC Requirements for Electrical Equipment for Measurement, Control and Laboratory Use
EN 61010-1: 1993 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use
Specifications for SM Semi Micro Balances:
Model SM 50 SM 99 SM 124D SM 128D
Weighing Mode Single Range Dual Range
(Floating Tare™)
Capacity 50g 99g 40g
120g
80g
120g
Readability .00001g .00001g
.0001g
Tare Range 0-80g 0-99g 0-120g
0-120g
0-120g
0-120g
Repeatability
(Standard Deviation)
.00002g .00004g .00002g
.0001g
.00003g
.0001g
Linearity ±.00003g ±.00003g ±.00003g
±.0002g
±.00003g
±.0002g
Stabilization Time ~8 Seconds
Weighing Speed Adaptive
Display Update Interval 800ms
Data Interface RS-232 bidirectional interface is standard. Baud rates are 300, 600, 1200, 2400, 4800, 9600 and 19,200.
Pan Size Circular 3.5 inch diameter
Operating Temperature 5°C to 40°C
Relative Humidity 80 % for temperatures up to 31°C decreasing linearly to 50 % at 40°C
Power Supply 115 Volts/60 Hz ± 10 %
230 Volts/50Hz or 60 Hz ± 10 %
Windscreen 7.5W x 8.25D x 9.5H
Calibration Weight 50g 100g 100g 100g
10g 50g 40g 50g
Housing (WxDxH) 7.5" x 11.25" x 3.25"
Weight ~ 13.8 lbs
22
Comentários a estes Manuais